Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the two 2.70 mm Phillips #00 screws on the side of the tablet that has the buttons and the headphone jack (bottom side when holding upright).
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Slide a plastic opening tool in between the edge of the back panel and the the top edge of the device.
-
Run the plastic opening tool along the sides of the tablet while keeping it in the crack between the tablet and the back panel to create an opening.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Apply pressure using your hand to pop the back panel off slowly, taking extra care around the speaker connection.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
The back panel should now be disconnected from the device. This provides access to the components of the device for repairing and replacing parts of the tablet.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.