Saltar al contenido principal

Apex TM772 Rear Camera Replacement

Qué necesitas

  1. Apex TM772 Rear Camera Replacement, Rear Camera: paso 1, imagen 1 de 1
    • The rear facing camera is located at the top right just below the front facing camera as looking inside the device.

    • With tweezers or your fingers remove the tape covering the camera’s pin connector.

  2. Apex TM772 Rear Camera Replacement: paso 2, imagen 1 de 1
    • With tweezers, flip the black latch to open the pin connector and remove the cable.

    • The camera is adhered to the device with double sided foam tape. Carefully remove the camera from the tape with a metal spudger. If the tape is damaged, you’ll need to replace it.

    • Replace the camera with the new one and assemble the device in reverse of these instructions.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 68