Saltar al contenido principal

Anne Pro 2 Case/Housing Replacement

Qué necesitas

  1. Anne Pro 2 Case/Housing Replacement, Case/Housing: paso 1, imagen 1 de 3 Anne Pro 2 Case/Housing Replacement, Case/Housing: paso 1, imagen 2 de 3 Anne Pro 2 Case/Housing Replacement, Case/Housing: paso 1, imagen 3 de 3
    • Unplug the Anne Pro 2 Keyboard.

    • Turn off the Anne Pro 2 Keyboard using the switch on the bottom.

  2. Anne Pro 2 Case/Housing Replacement: paso 2, imagen 1 de 2 Anne Pro 2 Case/Housing Replacement: paso 2, imagen 2 de 2
    • Using a keycap remover, remove the the following keycaps: Left Alt, Space Bar, Right Shift, Backslash, Y, H, and the Tab key.

  3. Anne Pro 2 Case/Housing Replacement: paso 3, imagen 1 de 2 Anne Pro 2 Case/Housing Replacement: paso 3, imagen 2 de 2
    • Using a Torx T5 bit, remove the five screws from the keyboard.

  4. Anne Pro 2 Case/Housing Replacement: paso 4, imagen 1 de 2 Anne Pro 2 Case/Housing Replacement: paso 4, imagen 2 de 2
    • Lift the keyboard slowly from the bottom side.

    • Do not fully lift the PCB because the battery is still plugged in.

  5. Anne Pro 2 Case/Housing Replacement: paso 5, imagen 1 de 2 Anne Pro 2 Case/Housing Replacement: paso 5, imagen 2 de 2
    • Gently unplug the battery connector by wiggling it back and forth.

  6. Anne Pro 2 Case/Housing Replacement: paso 6, imagen 1 de 2 Anne Pro 2 Case/Housing Replacement: paso 6, imagen 2 de 2
    • Remove the PCB from the main case.

    • Gently lower the PCB into the Zero-Degree housing from the top side first.

    • Firmly press it in once you have lowered it.

  7. Anne Pro 2 Case/Housing Replacement: paso 7, imagen 1 de 2 Anne Pro 2 Case/Housing Replacement: paso 7, imagen 2 de 2
    • Screw the five T5 Torx screws back into place.

  8. Anne Pro 2 Case/Housing Replacement: paso 8, imagen 1 de 2 Anne Pro 2 Case/Housing Replacement: paso 8, imagen 2 de 2
    • Take the seven keycaps you removed and gently place them in their intended spots on the keyboard.

    • Firmly press them in, ensuring they are flush with the rest of the keys.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Mohamed

Miembro Desde 09/15/20

205 Reputación

1 Guía escrita

Equipo

Un comentario

Anne Pro 2 Software manage the illumination, open the mobile App and choose a pre-programmed scheme or design your own pattern, with a distinct colour for each key if desired. The programmes are easy to use and work on both Mac and PC.

Visit Here-   https://www.techtoreview.com/top-picks/a...

Abhinav Pal - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 6

Ultimos 7 días: 28

Ultimos 30 días: 122

Todo El Tiempo: 9,833