Repara tus cosas Comunidad Tienda

Anker 2.4G Wireless Mouse LED Replacement

Introducción

This guide shows how to replace the LED on the Anker 2.4G Wireless Mouse. The mouse will stop working if the LED inside stops working. Instead of throwing out a mostly functioning product, simply replace the LED and get the mouse working again.

Qué necesitas

  1. Anker 2.4G Wireless Mouse LED Replacement, LED: paso 1, imagen 1 de 1

    • Use a spudger to gently pry off the stickers to reveal the location of the four screws.

    Editar

  2. Anker 2.4G Wireless Mouse LED Replacement: paso 2, imagen 1 de 1

    • Remove the four screws to continue.

    Editar

  3. Anker 2.4G Wireless Mouse LED Replacement: paso 3, imagen 1 de 2 Anker 2.4G Wireless Mouse LED Replacement: paso 3, imagen 2 de 2

    • Pry the center of the mouse apart using a spudger to separate the upper and lower housing of the boards.

    Editar

  5. Anker 2.4G Wireless Mouse LED Replacement: paso 4, imagen 1 de 1

    • Remove the wires from the white crimp headers. This will separate the upper and lower housing units of the mouse.

    • Pull as far up on the wire as possible, but be careful to avoid ripping the wires.

    Editar

  6. Anker 2.4G Wireless Mouse LED Replacement: paso 5, imagen 1 de 2 Anker 2.4G Wireless Mouse LED Replacement: paso 5, imagen 2 de 2

    • Take the upper housing of the mouse and remove the two screws that hold the board in place.

    Editar

  7. Anker 2.4G Wireless Mouse LED Replacement: paso 6, imagen 1 de 1

    • Gently remove the circuit board from the mouse.

    Editar

  8. Anker 2.4G Wireless Mouse LED Replacement: paso 7, imagen 1 de 1

    • To remove the LED, flip the board over and desolder the wires.

    • Replace LED with a new LED and resolder into place.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Colin

Miembro Desde 02/10/14

406 Reputación

3 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

Cal Poly, Team 1-39, Maness Winter 2014 Miembro de Cal Poly, Team 1-39, Maness Winter 2014

CPSU-MANESS-W14S1G39

4 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 5

Todo El Tiempo: 2,876