Introducción
This guide provides essential information and steps on how to replace a faulty camera, including a step by step disassembling and removing instructions. Follow steps 1-3 to open the device. Ignore steps 4 and 5 and go straight to step 6 after doing so.
Qué necesitas
-
-
Remove the two 00 Phillips screws located in the right hand side of the tablet.
-
-
-
-
Start by removing the electrical tape covering the camera, located at the top left corner of the device.
-
To reassemble your device, follow these instructions in reverse order. Do not forget to put electrical tape back in place.
To reassemble your device, follow these instructions in reverse order. Do not forget to put electrical tape back in place.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.