American Sanders EZSand Orbital Sander 07163A 2012 Sandpaper Disc Replacement

Introducción

Use this guide to replace the hook-and-loop sandpaper disc on a Clarke Floor Sander 07163A 2012.

This guide shows the removal of just one disc, but the procedure for the other two discs is identical.

Before you begin, be sure that the sander is unplugged and powered off.
Carefully tilt the sander back and lay it down on its side, exposing the three sanding pads on the bottom.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Miembro Desde 03/04/19

896 Reputación

7 Guías creadas

Community

14,240 Miembros

76 Guías creadas