Amazon Fire TV Cube Motherboard Replacement

Introducción

These steps will guide you through the disassembly and the replacement of the Fire TV Cube motherboard. This guide requires the metal flathead spudger. Use extra caution when detaching wires.

Qué necesitas

Paso 1 Speaker

Amazon Fire TV Cube Motherboard Replacement, Speaker: paso 1, imagen 1 de 3

Amazon Fire TV Cube Motherboard Replacement, Speaker: paso 1, imagen 2 de 3

Amazon Fire TV Cube Motherboard Replacement, Speaker: paso 1, imagen 3 de 3

Using a metal spudger, push down between the edge seals on the base and pry off the base.
Do not confuse the top thin layer of rubber with the thick palette that needs to be removed.
This may require substantial force.

Editar

Paso 2

Amazon Fire TV Cube Motherboard Replacement: paso 2, imagen 3 de 3

Use the T-10 bit from the iFixit tool kit to unscrew the four 1.4 inch corner screws on top of the first layer.
There are 4 washers to go with each of the screws.

Editar

Paso 3

Lift and remove the full frame.

Editar

Paso 4

Lift and remove the speaker.
Carefully match the outlets on the speaker with the outlets on the motherboard.

Editar

Paso 5 Motherboard

Amazon Fire TV Cube Motherboard Replacement, Motherboard: paso 5, imagen 1 de 2

Amazon Fire TV Cube Motherboard Replacement, Motherboard: paso 5, imagen 2 de 2

Lift the black latch by gently prying up with the flat end of the Spudger.
Detach the copper tap by pulling it out.

Editar

Paso 6

Use the pointed end of the Spudger to carefully detach the black and white wires from the motherboard.
Make sure all three attachments (the copper tab and both wires) are fully disconnected before continuing.

Editar

Paso 7

Gently pry the motherboard up and off.

Editar

Nobody anywhere has these motherboards so what good are instructions to replace. It’s like being given a car that doesn’t have keys and those keys can’t be made anywhere.

futuregu - 25 de may. de 2020 Contestar