Saltar al contenido principal

Amazon Fire HD 10 Rear Facing Camera Replacement

Qué necesitas

  1. Amazon Fire HD 10 Rear Facing Camera Replacement, Screen: paso 1, imagen 1 de 3 Amazon Fire HD 10 Rear Facing Camera Replacement, Screen: paso 1, imagen 2 de 3 Amazon Fire HD 10 Rear Facing Camera Replacement, Screen: paso 1, imagen 3 de 3
    • Avoid prying near bottom right hand side due to LCD Connector

    • Use a plastic opening tool to pry the screen up in the right hand corner.

  2. Amazon Fire HD 10 Rear Facing Camera Replacement: paso 2, imagen 1 de 1
    • Do not completely remove the screen yet as there is a ZIF connector connected.

    • Lift the screen and digitizer from the case.

    • You may need to use some force due to the glue.

  3. Amazon Fire HD 10 Rear Facing Camera Replacement: paso 3, imagen 1 de 2 Amazon Fire HD 10 Rear Facing Camera Replacement: paso 3, imagen 2 de 2
    • Be mindful of the ZIF connector.

    • Disconnect the ribbon connector from the digitizer side using your hands or the plastic opening tool.

  4. Amazon Fire HD 10 Rear Facing Camera Replacement: paso 4, imagen 1 de 1
    • Remove the screen and digitizer from the case completely.

  5. Amazon Fire HD 10 Rear Facing Camera Replacement, Rear Facing Camera: paso 5, imagen 1 de 2 Amazon Fire HD 10 Rear Facing Camera Replacement, Rear Facing Camera: paso 5, imagen 2 de 2
    • Remove the single T5 Torx screw at the base of the camera.

    • Once removed, place the screw aside in a safe location.

  6. Amazon Fire HD 10 Rear Facing Camera Replacement: paso 6, imagen 1 de 2 Amazon Fire HD 10 Rear Facing Camera Replacement: paso 6, imagen 2 de 2
    • Lift the camera from the case using the plastic opening tool.

    • The camera is still connected to the motherboard via the ZIF connector.

  7. Amazon Fire HD 10 Rear Facing Camera Replacement: paso 7, imagen 1 de 2 Amazon Fire HD 10 Rear Facing Camera Replacement: paso 7, imagen 2 de 2
    • Gently grab the camera and pull to remove.

    • The camera is now free from the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Jaie Hillery

Miembro Desde 10/07/14

1,718 Reputación

10 Guías creadas

Equipo

USF Tampa, Team 16-6, Blackwell Winter 2016 Miembro de USF Tampa, Team 16-6, Blackwell Winter 2016

USFT-BLACKWELL-W16S16G6

3 Miembros

22 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 864