Saltar al contenido principal

Introducción

The motherboard is the key to making every other part of the Alexa function, so many mystery issues might be linked back to a fault with the motherboard. As always, make sure you have grounded yourself and removed any static electricity by touching a metal surface before touching any circuitry.

Partes

No se especificaron partes.

  1. First, use your hands to gently remove the taped-in rubber foot from device. First, use your hands to gently remove the taped-in rubber foot from device.
    • First, use your hands to gently remove the taped-in rubber foot from device.

  2. Carefully peel off the bottom pad to expose the fastening screws.
    • Carefully peel off the bottom pad to expose the fastening screws.

    • Remove three silver 1.4 T5 Torx screws on the top row.

    • Remove one green 1mm T5 Torx screw in the middle.

    • Remove a black 1.5mm T5 screw.

    • Remove three green 1mm T5 screws from the bottom row.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. After the screws are removed, grip the front panel and separate the front from the back. This will expose the inside of the device. Use tweezers or your hands to carefully disconnect the red wires connecting the speakers to the power supply board. Visually locate the motherboard within the device. It is the large green panel right above the speakers.
    • After the screws are removed, grip the front panel and separate the front from the back. This will expose the inside of the device.

    • Use tweezers or your hands to carefully disconnect the red wires connecting the speakers to the power supply board.

    • Visually locate the motherboard within the device. It is the large green panel right above the speakers.

  5. Unscrew the ten  1mm T5 Torx screws holding the motherboard in place. Unscrew the ten  1mm T5 Torx screws holding the motherboard in place.
    • Unscrew the ten 1mm T5 Torx screws holding the motherboard in place.

  6. Remove two 1mm T5 Torx screws holding down a wire connected to the motherboard.
    • Remove two 1mm T5 Torx screws holding down a wire connected to the motherboard.

    • Remove a small piece of black electrical tape attached to the wire.

  7. Once all the screws have been removed, you should be able to gently lift the motherboard up and out of the device.
    • Once all the screws have been removed, you should be able to gently lift the motherboard up and out of the device.

Conclusión

To reassemble your device, follow these instructions in reverse order. Make sure that the ring on the black wire is attached between the circuit board and the screw, and that the black tape on the end is lined up as well.

Where can I find a new mother board

ralphm1944 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 15

Últimos 30 Días: 39

Todo El Tiempo: 336