Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Instead of a putty knife a dozen or more 1-1/2" pins are required.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
With the computer upside down identify the apertures where the catches are located along either side and also at the front.
-
Insert the pins from the adjacent apertures between the wall and each catch. Be very careful to keep the pins against the case wall. This is more obvious from the second photo with the case removed.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the case off from the back first.
-
Remove the pins from the main assembly.
-
Cancelar: No complete esta guía.
16 personas más completaron esta guía.
Un comentario
I've recently acquired a G4 Mini 1.33 "Silent Upgrade" on eBay and plan on opening up using your guide :) Thanks so very, VERY much!
