Introducción

If you are having various issues with your device, this guide will show you how to remove and replace the motherboard.

  1. Remove external rubber cover.
    • Remove external rubber cover.

  2. Use blue plastic opening tool to remove the external speaker face by placing it in the slight opening at the bottom.
    • Use blue plastic opening tool to remove the external speaker face by placing it in the slight opening at the bottom.

      • Use a lever motion, push the tool down, lifting the speaker face.

      • Use fingers to grip and remove speaker face.

    • Repeat on reverse side to remove the second speaker face.

    • Orient speaker so volume buttons are facing away from you, and Bluetooth and power buttons are on the left-hand side.

    • Remove the seven 14mm screws using the Phillips #1 screwdriver.

    • Reorient speaker so Bluetooth and power buttons are now on the right-hand side.

    • Separate the two panels along the crease.

      • Blue plastic opening tool may be needed to separate panels.

    • Remove the panel with no buttons to expose internal area of the device.

    • Motherboard and all internal components are under this panel.

    • Remove the five wiring attachments (for the volume board, bluetooth board, speakers, and microUSB) from their connection to the motherboard by pulling slightly.

    • Remove the two 9mm screws holding the motherboard in place using the Torx T5 screwdriver.

    • Remove the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 30

Todo El Tiempo: 49