Altec Lansing Mini Lifejacket 2 Speaker Replacement

Introducción

If your Altec Lansing Mini Lifejacket 2's speaker is damaged or faulty, use the following step-by-step guide to replace it. This guide applies to both the speakers.

Qué necesitas

Paso 1 Back Panel

Altec Lansing Mini Lifejacket 2 Speaker Replacement, Back Panel: paso 1, imagen 1 de 3

Altec Lansing Mini Lifejacket 2 Speaker Replacement, Back Panel: paso 1, imagen 2 de 3

Altec Lansing Mini Lifejacket 2 Speaker Replacement, Back Panel: paso 1, imagen 3 de 3

Use the spudger to remove the eight black pins from the front and back of the wire screens.

Traducir

Paso 2

Altec Lansing Mini Lifejacket 2 Speaker Replacement: paso 2, imagen 3 de 3

Detach the eight secondary pins from the front and back of the wire mesh plates with a spudger.
Removing the secondary pins from the rubber casing is optional.

Traducir

Paso 3

Remove both black and orange layers from the speaker body.

Traducir

Paso 4

Altec Lansing Mini Lifejacket 2 Speaker Replacement: paso 4, imagen 3 de 3

Remove the single 7.8mm Phillips #2 screw from the mounting plate located under the device.
Slide the mounting plate out to remove it.

Traducir

mine does not have a phillips screw at the post area

William Graham - 21 de jul. de 2023 Contestar

Paso 5

Pry off the wire mesh on both sides using a metal spudger.
Be gentle to avoid bending the mesh.

Traducir

Paso 6

Using tweezers, remove the four rubber stoppers in each corner of the rear panel.

Traducir

Paso 7

Remove the four 13.7mm Phillips #1 screws located underneath the rubber stoppers.

Traducir

Paso 8

Pull the case apart to access the interior components.

Traducir

Paso 9

Altec Lansing Mini Lifejacket 2 Speaker Replacement: paso 9, imagen 3 de 3

To remove the back panel, gently pull out its wire harness.

Traducir

What does doing all of this accomplish?

Is there an end result here? Now what?

Lynn Bits - 19 de may. de 2022 Contestar

What does all of accomplish? Now what? How does it fix the fact the device won’t charge at the charging port?

Lynn Bits - 19 de may. de 2022 Contestar

conclusion????? what i do now????

Manuel Jorge Monteiro - 17 de jun. de 2023 Contestar

Paso 10 Speaker

Altec Lansing Mini Lifejacket 2 Speaker Replacement, Speaker: paso 10, imagen 1 de 2

Altec Lansing Mini Lifejacket 2 Speaker Replacement, Speaker: paso 10, imagen 2 de 2

Remove the three 9.3 mm Phillips #1 screws on the speaker cover.

Traducir

Paso 11

Altec Lansing Mini Lifejacket 2 Speaker Replacement: paso 11, imagen 3 de 3

To remove the speaker, gently pull out the its wire harness.

Traducir

Paso 12

Remove the rubber ring from the rim of the speaker.
This ring helps keep water from entering the device. Be careful to position it correctly during reassembly.

Traducir

Where can i buy the altec lansing lifejacket 2 internal speakers online? Can you provide me the link?

Chetan - 15 de ago. de 2019 Contestar

Is there a part number for these two speakers? My speakers are making a crackling noise. Most likely one or two of the speakers are blown. I'm going to open it and check it. Where can I purchase these speakers online?

GSPA - 29 de nov. de 2022 Contestar