Saltar al contenido principal

Altec Lansing BoomJacket 2 Disassembly

Qué necesitas

  1. Altec Lansing BoomJacket 2 Disassembly, Altec Lansing BoomJacket 2 Disassembly: paso 1, imagen 1 de 2 Altec Lansing BoomJacket 2 Disassembly, Altec Lansing BoomJacket 2 Disassembly: paso 1, imagen 2 de 2
    • Starting from any side, use your fingers to grab the black rubber sleeve and gently pull away from the speaker on both sides.

  2. Altec Lansing BoomJacket 2 Disassembly: paso 2, imagen 1 de 2 Altec Lansing BoomJacket 2 Disassembly: paso 2, imagen 2 de 2
    • Using your fingers, grab the blue sleeve from one side and pull away from the unit.

  3. Altec Lansing BoomJacket 2 Disassembly: paso 3, imagen 1 de 1
    • At each of the marked pry spots, use the metal spudger to lift the speaker grill away from the case.

    • Avoid using excessive force to prevent bending the grill.

  4. Altec Lansing BoomJacket 2 Disassembly: paso 4, imagen 1 de 2 Altec Lansing BoomJacket 2 Disassembly: paso 4, imagen 2 de 2
    • Use the tweezers to remove the six rubber stoppers. There are four in the middle and two on the sides.

  5. Altec Lansing BoomJacket 2 Disassembly: paso 5, imagen 1 de 1
    • Use the PH1 Phillips screwdriver to remove the six 12mm screws that lie underneath each rubber stopper.

  6. Altec Lansing BoomJacket 2 Disassembly: paso 6, imagen 1 de 1
    • Gently pull apart the front panel from the base of the speaker.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Zach Braaten

Miembro Desde 07/12/18

516 Reputación

4 Guías creadas

Equipo

UW Tacoma, Team S1-G4, Cardinal Summer 2018 Miembro de UW Tacoma, Team S1-G4, Cardinal Summer 2018

UWT-CARDINAL-SU18S1G4

4 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 26

Todo El Tiempo: 1,482