Repara tus cosas Comunidad Tienda

Altec Lansing BoomJacket 2 Battery Replacement

Introducción

If your BoomJacket 2 loses charge rapidly, or fails to charge at all consider replacing the battery.

Qué necesitas

  1. Altec Lansing BoomJacket 2 Battery Replacement, Altec Lansing BoomJacket 2 Disassembly: paso 1, imagen 1 de 2 Altec Lansing BoomJacket 2 Battery Replacement, Altec Lansing BoomJacket 2 Disassembly: paso 1, imagen 2 de 2

    • Starting from any side, use your fingers to grab the black rubber sleeve and gently pull away from the speaker on both sides.

    Editar

  2. Altec Lansing BoomJacket 2 Battery Replacement: paso 2, imagen 1 de 2 Altec Lansing BoomJacket 2 Battery Replacement: paso 2, imagen 2 de 2

    • Using your fingers, grab the blue sleeve from one side and pull away from the unit.

    Editar

  3. Altec Lansing BoomJacket 2 Battery Replacement: paso 3, imagen 1 de 1

    • At each of the marked pry spots, use the metal spudger to lift the speaker grill away from the case.

    • Avoid using excessive force to prevent bending the grill.

    Editar

  5. Altec Lansing BoomJacket 2 Battery Replacement: paso 4, imagen 1 de 2 Altec Lansing BoomJacket 2 Battery Replacement: paso 4, imagen 2 de 2
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Use the tweezers to remove the six rubber stoppers. There are four in the middle and two on the sides.

    Editar

  6. Altec Lansing BoomJacket 2 Battery Replacement: paso 5, imagen 1 de 1

    • Use the PH1 Phillips screwdriver to remove the six 12mm screws that lie underneath each rubber stopper.

    Editar

  7. Altec Lansing BoomJacket 2 Battery Replacement: paso 6, imagen 1 de 1

    • Gently pull apart the front panel from the base of the speaker.

    Editar

  8. Altec Lansing BoomJacket 2 Battery Replacement, Battery: paso 7, imagen 1 de 1

    • The battery will be in the middle of the speaker when the case is open.

    Editar

  9. Altec Lansing BoomJacket 2 Battery Replacement: paso 8, imagen 1 de 1

    • Pull firmly from both sides of the pin to disconnect the battery cable from the motherboard.

    • Pull battery up and away from speaker without catching any other components.

    • Motherboards have fragile components and can easily be damaged if they are hit or pulled on while extracting other parts.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Zach Braaten

Miembro Desde 07/12/18

516 Reputación

4 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

UW Tacoma, Team S1-G4, Cardinal Summer 2018 Miembro de UW Tacoma, Team S1-G4, Cardinal Summer 2018

UWT-CARDINAL-SU18S1G4

4 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 8

Ultimos 30 días: 27

Todo El Tiempo: 1,489