Introducción

Batteries fail from heat and if they reach their max charge cycles limit. This guide will show you how to replace it.

Partes

No se requieren partes.

  1. Loosen the top left and top right 6.5mm PH1 screws that hold down the back cover.
    • Loosen the top left and top right 6.5mm PH1 screws that hold down the back cover.

    • The screws will not be able to be removed from the back cover. They can only be loosened or tightened.

  2. Slide back cover forward using your thumbs.
    • Slide back cover forward using your thumbs.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Lift up the cover and set aside exposing the internals of the computer.
    • Lift up the cover and set aside exposing the internals of the computer.

  5. Make sure the laptop is turned off before starting.
    • Make sure the laptop is turned off before starting.

    • Using PH1 screwdriver loosen the two screws on the right of the battery.

    • The screws will not be able to be removed from the battery. They can only be loosened or tightened.

  6. Pull battery up using the tab provided. Pull battery up using the tab provided.
    • Pull battery up using the tab provided.

  7. Disconnect the clip connecting the battery to the computer.
    • Disconnect the clip connecting the battery to the computer.

    • Set battery aside.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Andonaq Grozdani

Miembro Desde 01/03/18

718 Reputación

5 Guías creadas

Equipo

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 2

Últimos 30 Días: 15

Todo El Tiempo: 204