Introducción

Is your computer not loading application properly? Consider using this guide to replace the RAM in your laptop.

Partes

No se requieren partes.

  1. Please power off the computer and deplete the battery before attempting the following step.
    • Please power off the computer and deplete the battery before attempting the following step.

  2. Press down on the battery latch and slide it to the left.
    • Press down on the battery latch and slide it to the left.

    • Lift the battery out once it pops out.

    • Loosen the two silver Phillips #1 screws.

    • The screws are held to the compartment door by a washer and cannot be removed.

    • Use your hand to gently lift and remove the compartment door.

    • Remove the Phillips #1 screw holding the plate.

    • Use your hand to remove the plate.

    • The screw is held to the plate by a washer and cannot be removed.

    • Pull the clips to the side away from each other. The RAM will pop up.

    • Lift forward and gently loosen to pull out of socket.

    • For the second RAM card use the opening tool to gently lift the RAM card forward.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jose

Miembro Desde 19/09/18

265 Reputación

3 Guías creadas

Equipo

CSU Fullerton, Team S2-G2, Bruce Fall 2018 Miembro de CSU Fullerton, Team S2-G2, Bruce Fall 2018

CSUF-BRUCE-F18S2G2

4 Miembros

8 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 2

Últimos 30 Días: 23

Todo El Tiempo: 56