Introducción

Is your device heating up unexpectedly or making loud noises? Consider using this guide to replace the fan of your device.

Partes

No se requieren partes.

  1. Please power off the computer and deplete the battery before attempting the following step.
    • Please power off the computer and deplete the battery before attempting the following step.

  2. Press down on the battery latch and slide it to the left. Lift the battery out once it pops out.
    • Press down on the battery latch and slide it to the left.

    • Lift the battery out once it pops out.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Loosen the two silver Phillips #1 screws.
    • Loosen the two silver Phillips #1 screws.

    • The screws are held to the compartment door by a washer and cannot be removed.

  5. Use your hand to gently lift and remove the compartment door. Use your hand to gently lift and remove the compartment door.
    • Use your hand to gently lift and remove the compartment door.

  6. Loosen the three black Phillips #1 screws. The screws are held to the fan by a washer and cannot be removed. The screws are held to the fan by a washer and cannot be removed.
    • Loosen the three black Phillips #1 screws.

    • The screws are held to the fan by a washer and cannot be removed.

  7. Use your hand to gently lift the fan from the laptop. Careful not to pull too hard on CPU fan cable.
    • Use your hand to gently lift the fan from the laptop.

    • Careful not to pull too hard on CPU fan cable.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Kevin Palacios

Miembro Desde 17/09/18

169 Reputación

2 Guías creadas

Equipo

CSU Fullerton, Team S2-G2, Bruce Fall 2018 Miembro de CSU Fullerton, Team S2-G2, Bruce Fall 2018

CSUF-BRUCE-F18S2G2

4 Miembros

8 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 3

Todo El Tiempo: 73