Saltar al contenido principal

Introducción

In this guide, we will be showing you how to remove and replace the Optical Drive.

Partes

No se especificaron partes.

  1. WARNING: Before working inside your computer, read the safety  information that shipped with your computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • WARNING: Before performing these procedures, turn off the computer, disconnect the AC adapter from the electrical outlet and the computer, disconnect the modem from the wall connector and the computer, and remove any other external cables from the computer.

    • Remove the screw that secures the optical drive to the computer base.

  2. Make sure the Center Control Center, Keyboard, Palm Rest, Display Assembly, Magnesium Cover and Input/Output Board is removed.
    • Make sure the Center Control Center, Keyboard, Palm Rest, Display Assembly, Magnesium Cover and Input/Output Board is removed.

    • Remove the three screws that secure the optical drive to the computer base.

  3. Skip the upgrade.

    Descuento de $10 en tu factura de $50 con
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Lift the optical drive out of the computer.
    • Lift the optical drive out of the computer.

    • Remove the five screws that secure the optical drive to the optical-drive bracket and lift the optical-drive bracket out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Terrence15

Miembro Desde 18/12/17

71,266 Reputación

442 Guías creadas

Equipo

Informative Technologies Inc. Miembro de Informative Technologies Inc.

Community

14 Miembros

926 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 17

Todo El Tiempo: 326