Saltar al contenido principal

Introducción

How to remove and replace the Base Cover.

Partes

No se especificaron partes.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Turn the computer over.

  2. Loosen the eight captive screws that secure the base cover to the computer base.
    • Loosen the eight captive screws that secure the base cover to the computer base.

  3. Lift the base cover off the computer base.
    • Lift the base cover off the computer base.

  4. Align the tabs on the NEW base cover with the slots on the computer base and place the base cover in position.
    • Align the tabs on the NEW base cover with the slots on the computer base and place the base cover in position.

  5. Tighten the eight screws that secure the base cover to the computer base.
    • Tighten the eight screws that secure the base cover to the computer base.

Linea de Meta

2 personas más completaron esta guía.

darrius

Miembro Desde 26/03/18

5,183 Reputación

30 Guías creadas

Equipo

Informative Technologies Inc. Miembro de Informative Technologies Inc.

Community

38 Miembros

1,949 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 112