Saltar al contenido principal

Introducción

how to remove and replace power button board

Partes

No se especificaron partes.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Remove the two screws that secure the power button board to the palm rest assembly.

  2. Lift the power button board off the palm rest assembly.
    • Lift the power button board off the palm rest assembly.

  3. Place the power button board on the palm rest assembly and replace the two screws that secure the power button board to the palm rest assembly.
    • Place the power button board on the palm rest assembly and replace the two screws that secure the power button board to the palm rest assembly.

    • CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage the computer.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

darrius

Miembro Desde 26/03/18

5,129 Reputación

30 Guías creadas

Equipo

Informative Technologies Inc. Miembro de Informative Technologies Inc.

Community

37 Miembros

2,013 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 173