Qué necesitas
-
-
Lift the latch and disconnect the status-light board to the palm-rest assembly.
-
-
-
Remove the screws that secure the status-light board to the palm-rest assembly.
-
-
-
-
Lift the status-light board off the palm-rest assembly.
-
-
-
Align the screw holes on the status-light board with the screw holes on the palm-rest assembly.
-
-
-
Replace the screws that secure the status-light board to the palm-rest assembly.
-
-
-
Slide the status-light board cable into the connector on the status-light board and press down the latch to secure the cable.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.