Introducción

In the case that your device is not producing any sound, it may be necessary to replace the speaker completely. This guide shows you where the speaker is within your device and how to replace it!

Partes

No se requieren partes.

  1. Begin by opening SD port cover as this is the best location to start prying.
    • Begin by opening SD port cover as this is the best location to start prying.

  2. Use the plastic opening tool to pry around the edges of the back cover until it pops off.
    • Use the plastic opening tool to pry around the edges of the back cover until it pops off.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Locate the speaker on the bottom left hand  side of the back cover.
    • Locate the speaker on the bottom left hand side of the back cover.

  5. Using the plastic opening tool, dig under the silver speaker to remove it from the back cover. Using the plastic opening tool, dig under the silver speaker to remove it from the back cover.
    • Using the plastic opening tool, dig under the silver speaker to remove it from the back cover.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Libby West

Miembro Desde 20/03/18

85 Reputación

1 Guía escrita

Equipo

IUPUI, Team S6-G2, Baechle Spring 2018 Miembro de IUPUI, Team S6-G2, Baechle Spring 2018

IUPUI-BAECHLE-S18S6G2

3 Miembros

4 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 52