Saltar al contenido principal

Alcatel One Touch Pop 7 Microphone Replacement

Qué necesitas

  1. Alcatel One Touch Pop 7  Microphone Replacement, Back Cover: paso 1, imagen 1 de 1
    • Begin by opening SD port cover as this is the best location to start prying.

  2. Alcatel One Touch Pop 7  Microphone Replacement: paso 2, imagen 1 de 1
    • Use the plastic opening tool to pry around the edges of the back cover until it pops off.

  3. Alcatel One Touch Pop 7  Microphone Replacement, Microphone: paso 3, imagen 1 de 1
    • Disconnect battery by pulling up on the ZIF connector with precision tweezers for safety.

  4. Alcatel One Touch Pop 7  Microphone Replacement: paso 4, imagen 1 de 1
    • Remove the Microphone from it's slot with the precision tweezers.

  5. Alcatel One Touch Pop 7  Microphone Replacement: paso 5, imagen 1 de 1
    • Solder the wires off of the motherboard with a soldering iron while holding the wires with the precision tweezers. For information on how to solder safely and correctly go to this link: Cómo soldar y desoldar conexiones

Conclusión

To reassemble your device, follow these instructions in reverse order.

Philip Schenck

Miembro Desde 03/20/18

181 Reputación

2 Guías creadas

Equipo

IUPUI, Team S6-G2, Baechle Spring 2018 Miembro de IUPUI, Team S6-G2, Baechle Spring 2018

IUPUI-BAECHLE-S18S6G2

3 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 8

Todo El Tiempo: 821