Introducción

In the case that your Alcatel One Touch Pop 7 Tablet is not registering sound when recording, their may be a problem with the microphone. This guide will show you how to replace the microphone within this device.

  1. Begin by opening SD port cover as this is the best location to start prying.
    • Begin by opening SD port cover as this is the best location to start prying.

  2. Use the plastic opening tool to pry around the edges of the back cover until it pops off.
    • Use the plastic opening tool to pry around the edges of the back cover until it pops off.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Disconnect battery by pulling up on the ZIF connector with precision tweezers for safety.
    • Disconnect battery by pulling up on the ZIF connector with precision tweezers for safety.

  5. Remove the Microphone from it's slot with the precision tweezers.
    • Remove the Microphone from it's slot with the precision tweezers.

  6. Solder the wires off of the motherboard with a soldering iron while holding the wires with the precision tweezers.  For information on how to solder safely and correctly go to this link: Cómo soldar y desoldar conexiones
    • Solder the wires off of the motherboard with a soldering iron while holding the wires with the precision tweezers. For information on how to solder safely and correctly go to this link: Cómo soldar y desoldar conexiones

Conclusión

To reassemble your device, follow these instructions in reverse order.

Philip Schenck

Miembro Desde 20/03/18

181 Reputación

2 Guías creadas

Equipo

IUPUI, Team S6-G2, Baechle Spring 2018 Miembro de IUPUI, Team S6-G2, Baechle Spring 2018

IUPUI-BAECHLE-S18S6G2

3 Miembros

4 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 5

Todo El Tiempo: 115