Repara tus cosas Comunidad Tienda

Airox Legendair Battery Replacement

Equipo médico
El fabricante de este equipo médico no ha avalado o contratado a iFixit ni a esta guía de reparación.

Introducción

When the battery warning alarm cannot be properly reset from the simple troubleshooting and the voltage from the battery is severely low, it may be necessary to replace the battery. This repair guide will aid the user through the process of replacing the battery in the ventilator.

The repair guide information is mentioned in following sections of the user repair manual as well:

· Chapter 2 – 2.1.1 Cleaning the Device

· Chapter 2 – 2.4.1 Opening and Closing

· Chapter 5 – 5.1.1 Removal/Installation of the Battery

Qué necesitas

  1. Airox Legendair Battery Replacement, How to Properly Clean the Airox Legendair: paso 1, imagen 1 de 1

    • First, switch off the device.

    Editar

    • Place the device in a clean and open environment.

    Editar

  3. Airox Legendair Battery Replacement: paso 3, imagen 1 de 1

    • Using a cloth or a sponge slightly dampened with a bactericide or germicide solution, gently clean the outside of the device.

    Editar

  4. Airox Legendair Battery Replacement: paso 4, imagen 1 de 1

    • If necessary, spray the device lightly with the germicide solution, taking account of the requirements discussed in the preliminary operations.

    • Do not allow any liquid to enter inside the device (in particular through the cooling apertures).

    Editar

    • Use a gentle air blast to clear away any remaining liquid from ventilator.

    Editar

  6. Airox Legendair Battery Replacement, Battery: paso 6, imagen 1 de 1

    • Make sure to turn off the ventilator before starting the repair.

    • Before you start the battery replacement process, make sure that the device has been placed in a clean and open environment.

    Editar

  7. Airox Legendair Battery Replacement: paso 7, imagen 1 de 1

    • Remove each attachment screw from the battery cover.

    Editar

  8. Airox Legendair Battery Replacement: paso 8, imagen 1 de 1

    • Remove the battery cover carefully by holding the rails and pulling toward the rear of the device.

    Editar

  9. Airox Legendair Battery Replacement: paso 9, imagen 1 de 1

    • Extract the current battery and replace it with the new battery.

    Editar

  10. Airox Legendair Battery Replacement: paso 10, imagen 1 de 1

    • Confirm that all elements line up together. Then, reattach the battery cover with the attachment screws that were removed in Step 2.

    Editar

  11. Airox Legendair Battery Replacement: paso 11, imagen 1 de 1

    • Switch the device to "Set Up Mode" by pressing the On/Off switch.

    • Hold the menu key until the menu options appear on the screen.

    • Select the "MAINTENANCE" option with cursor.

    • Select "Voltage control" and verify that the voltage of the battery is 28.5±1V.

    Editar
Conclusión

Perform the final inspection procedures by confirming that every screw is secure before putting back into service.

Autor

con 3 otros colaboradores

Caleb Erlenborn

Miembro Desde 04/09/20

174 Reputación

1 Guía escrita

Insignias: 3

Equipo

Cal Poly, Team S7-G15, Paton Spring 2020 Miembro de Cal Poly, Team S7-G15, Paton Spring 2020

CPSU-PATON-S20S7G15

3 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 332