Saltar al contenido principal

Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.

Qué necesitas

  1. Este paso está sin traducir. Ayuda a traducirlo

    : paso 1, imagen 1 de 1
    • Hold the device with an open corner available and facing you.

  2. Este paso está sin traducir. Ayuda a traducirlo

    : paso 2, imagen 1 de 1
    • Using your finger, pry open any of the four corners of the back of your AirCard 770S, until you see the back case disconnect from the device.

  3. Este paso está sin traducir. Ayuda a traducirlo

    : paso 3, imagen 1 de 1
    • Lift open the back case and remove it from the device.

  4. Este paso está sin traducir. Ayuda a traducirlo

    : paso 4, imagen 1 de 1
    • With the bottom of the device (above the charging port) facing you, use your thumb nail to lift up the battery.

  5. Este paso está sin traducir. Ayuda a traducirlo

    : paso 5, imagen 1 de 1
    • Once the battery is lifted up, use the rest of your hand to remove the battery out from the device.

    • To put the battery back in to the device, make sure to align the "gold stripes" on the side of the battery to where they correspond in the base of the device, and align the backing to reassemble to device.

Linea de Meta

Una persona más ha completado esta guía.

Caitlin Little

Miembro Desde 10/08/18

437 Reputación

3 Guías creadas

Equipo

Marist, Team S1-G2, Chaterdon Fall 2018 Miembro de Marist, Team S1-G2, Chaterdon Fall 2018

MARS-CHATERDON-F18S1G2

3 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 8

Ultimos 30 días: 40

Todo El Tiempo: 1,029