Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

The purpose of this guide is to provide instructions on replacing the front panel and gaining internal access to the controller of the Air Hog Smash Bots.

  1. Take out your controller and access to the back of the controller. Take out your controller and access to the back of the controller.
    • Take out your controller and access to the back of the controller.

  2. Remove the screw on  the battery lid. Using the Hex 4 socket and PH #0 bit, remove the 8 mm screw.
    • Remove the screw on the battery lid. Using the Hex 4 socket and PH #0 bit, remove the 8 mm screw.

  3. Remove the 2 AAA batteries.
    • Remove the 2 AAA batteries.

  4. Using the Hex 4 socket and PH #0 bit, remove the four 8 mm screws on the panel. Using the Hex 4 socket and PH #0 bit, remove the four 8 mm screws on the panel.
    • Using the Hex 4 socket and PH #0 bit, remove the four 8 mm screws on the panel.

  5. Use the plastic opening tool to disconnect the front and back parts of the panel. Some of the internal components may be displaced when opening the controller.
    • Use the plastic opening tool to disconnect the front and back parts of the panel.

    • Some of the internal components may be displaced when opening the controller.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jiani Xie

Miembro Desde 08/02/16

173 Reputación

1 Guía escrita

Equipo

IUPUI, Team 1-1, Baechle Spring 2016 Miembro de IUPUI, Team 1-1, Baechle Spring 2016

IUPUI-BAECHLE-S16S1G1

4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 90