Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

The purpose of this guide is to provide instructions on removing batteries from the Air Hog Smash Bots. A soldering iron will need to be used for this, directions on how to solder can be found here.

Partes

No se especificaron partes.

  1. Using the Phillips #0 screwdriver to remove the 8 mm screw.
    • Using the Phillips #0 screwdriver to remove the 8 mm screw.

  2. Lift and slide the batter cover  away from the tab holding it in place at the bottom.
    • Lift and slide the batter cover away from the tab holding it in place at the bottom.

  3. Remove the 3 AAA batteries.
    • Remove the 3 AAA batteries.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Nick Ciulla

Miembro Desde 08/02/16

240 Reputación

2 Guías creadas

Equipo

IUPUI, Team 1-1, Baechle Spring 2016 Miembro de IUPUI, Team 1-1, Baechle Spring 2016

IUPUI-BAECHLE-S16S1G1

4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 75