Repara tus cosas Comunidad Tienda

Aiptek Pocket DVII 1.3M LCD Display Screen Replacement

Qué necesitas

  1. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement, Display Screen: paso 1, imagen 1 de 3 Aiptek Pocket DVII 1.3M LCD Display Screen Replacement, Display Screen: paso 1, imagen 2 de 3 Aiptek Pocket DVII 1.3M LCD Display Screen Replacement, Display Screen: paso 1, imagen 3 de 3

    • Remove the battery cover.

    • Remove the batteries.

    Editar

  2. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: paso 2, imagen 1 de 2 Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: paso 2, imagen 2 de 2

    • Remove the sticky black dots.

    • Remove the three black 4mm screws from the flip screen. Use a Phillips head screw driver.

    Editar

  3. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: paso 3, imagen 1 de 1

    • Using an opening tool, separate the cover from the screen.

    • The cover won't completely come off. This will happen in the next step.

    • Don't be afraid to use a little more force.

    Editar

  4. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: paso 4, imagen 1 de 1

    • Using an opening tool remove the outside cover of the flip screen.

    • Move the cover towards the lens and then away from the screen.

    Editar

  6. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: paso 5, imagen 1 de 2 Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: paso 5, imagen 2 de 2

    • With the cover off, push the brown locking mechanism up, so the picture cable can be remove.

    • You only need to unplug the bottom cable in the picture.

    Editar

  7. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: paso 6, imagen 1 de 1

    • Remove the two black screws from the circuit board.

    Editar

  8. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: paso 7, imagen 1 de 1

    • With the opening tool, pop up the screen assembly.

    • The screen is glued to the black cover. Use more force if needed.

    Editar

  9. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: paso 8, imagen 1 de 1

    • As in step 5, push up the brown locking mechanism of the remaining cable.

    • Unplug the picture cable.

    Editar

  10. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: paso 9, imagen 1 de 1

    • Turn the circuit board over and with a soldering gun remove the two wires on each end.

    • Use a screwdriver to pull the loosened wire away.

    Editar

  11. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: paso 10, imagen 1 de 1

    • With the wires no longer holding the circuit board and screen together, remove and replace the broken screen.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Gyozo Aba Hivatal

Miembro Desde 01/21/15

561 Reputación

5 Guías creadas

Insignias: 14

+ 11 más insignias

Equipo

USF Tampa, Team 6-4, Brown Winter 2015 Miembro de USF Tampa, Team 6-4, Brown Winter 2015

USFT-BROWN-W15S6G4

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 343