Repara tus cosas Comunidad Tienda

Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement

Qué necesitas

  1. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement, Memory Ejecting Assembly: paso 1, imagen 1 de 3 Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement, Memory Ejecting Assembly: paso 1, imagen 2 de 3 Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement, Memory Ejecting Assembly: paso 1, imagen 3 de 3

    • Remove the battery cover.

    • Remove the batteries.

    Editar

  2. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: paso 2, imagen 1 de 1

    • Unscrew the three 4mm screws from the battery side of the device. Use a Phillips screw driver.

    Editar

  3. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: paso 3, imagen 1 de 1

    • Remove the four screws from the back side.

    Editar

  4. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: paso 4, imagen 1 de 2 Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: paso 4, imagen 2 de 2

    • Remove the sticky black dot.

    • Remove the hidden screw.

    Editar

  5. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: paso 5, imagen 1 de 2 Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: paso 5, imagen 2 de 2

    • Remove the two screws from the top side of the device.

    • Remove the two screws from the bottom side of the device.

    Editar

  7. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: paso 6, imagen 1 de 1

    • Remove the rear cover.

    • Be careful not to lose the spring inside.

    Editar

  8. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: paso 7, imagen 1 de 1

    • Pull back the front cover so that you can dislodge the side cover.

    Editar

  9. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: paso 8, imagen 1 de 1

    • Unfold the device and be careful not to tear the black and red power supply wires.

    Editar

  10. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: paso 9, imagen 1 de 1

    • Remove the four screws from the motherboard.

    Editar

  11. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: paso 10, imagen 1 de 1

    • Take out the motherboard while disconnecting the flip screen's cable from underneath.

    Editar

  12. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: paso 11, imagen 1 de 1

    • Remove the side cover.

    • Flip the device and locate the ejecting assembly.

    Editar

  13. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: paso 12, imagen 1 de 1

    • Remove the grey button.

    Editar

  14. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: paso 13, imagen 1 de 1

    • Push the metal arm the button was on all the way up.

    Editar

  15. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: paso 14, imagen 1 de 2 Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: paso 14, imagen 2 de 2

    • Pop the main metal arm out of the other metal arm's socket.

    • Position the arm vertically like in the first picture. The arm should come off easily.

    • Replace the ejecting arm.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 1 otro colaborador

Gyozo Aba Hivatal

Miembro Desde 01/21/15

561 Reputación

5 Guías creadas

Insignias: 14

+ 11 más insignias

Equipo

USF Tampa, Team 6-4, Brown Winter 2015 Miembro de USF Tampa, Team 6-4, Brown Winter 2015

USFT-BROWN-W15S6G4

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 109