Repara tus cosas Comunidad Tienda

Afterglow Wireless PS3 Controller Joystick Replacement

Introducción

In order to replace the joysticks for the Afterglow Wireless PS3 Controller the back plate must be removed and the joystick boards must be unscrewed.

Qué necesitas

  1. Afterglow Wireless PS3 Controller Joystick Replacement, Back Cover: paso 1, imagen 1 de 2 Afterglow Wireless PS3 Controller Joystick Replacement, Back Cover: paso 1, imagen 2 de 2

    • Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller.

    • Lift up and remove the controller back plate.

    Editar

  2. Afterglow Wireless PS3 Controller Joystick Replacement, Joystick: paso 2, imagen 1 de 1

    • Carefully remove the battery by lifting it straight up from its place.

    • Keep in mind that the red and black battery wires are attached to the motherboard. Handle these with care.

    Editar

  4. Afterglow Wireless PS3 Controller Joystick Replacement: paso 3, imagen 1 de 1

    • Unscrew the four 9mm Phillips #0 screws that are attached to both joy stick control mini-motherboards. There are two screws for each mini-motherboard.

    Editar

  5. Afterglow Wireless PS3 Controller Joystick Replacement: paso 4, imagen 1 de 2 Afterglow Wireless PS3 Controller Joystick Replacement: paso 4, imagen 2 de 2

    • Jiggle both joy stick control mini-motherboards out of their holding place.

    Editar

  6. Afterglow Wireless PS3 Controller Joystick Replacement: paso 5, imagen 1 de 3 Afterglow Wireless PS3 Controller Joystick Replacement: paso 5, imagen 2 de 3 Afterglow Wireless PS3 Controller Joystick Replacement: paso 5, imagen 3 de 3

    • Firmly grip the joystick housing with your forefingers by the yellow squares.

    • Use your other hand to get a grip on the black plastic joystick and pull directly away from the housing.

    • This will take some force to remove.

    • Try not to use the motherboard for leverage because it is delicate.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Aj Coello

Miembro Desde 02/17/17

789 Reputación

6 Guías creadas

Insignias: 14

+ 11 más insignias

Equipo

USF Tampa, Team S19-G5, Hoffman Spring 2017 Miembro de USF Tampa, Team S19-G5, Hoffman Spring 2017

USFT-HOFFMAN-S17S19G5

4 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 11

Ultimos 30 días: 44

Todo El Tiempo: 2,632