Saltar al contenido principal

Afterglow Wireless PS3 Controller Button Replacement

Qué necesitas

  1. Afterglow Wireless PS3 Controller Button Replacement, Back Cover: paso 1, imagen 1 de 2 Afterglow Wireless PS3 Controller Button Replacement, Back Cover: paso 1, imagen 2 de 2
    • Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller.

    • Lift up and remove the controller back plate.

  2. Afterglow Wireless PS3 Controller Button Replacement, Button: paso 2, imagen 1 de 2 Afterglow Wireless PS3 Controller Button Replacement, Button: paso 2, imagen 2 de 2
    • Carefully remove the battery by lifting it straight up from its place.

    • Keep in mind that the red and black battery wires are attached to the motherboard. Handle these with care.

  3. Afterglow Wireless PS3 Controller Button Replacement: paso 3, imagen 1 de 1
    • Unscrew the four 9mm Phillips #0 screws that are attached to both joy stick control mini-motherboards. There are two screws for each mini-motherboard.

  4. Afterglow Wireless PS3 Controller Button Replacement: paso 4, imagen 1 de 2 Afterglow Wireless PS3 Controller Button Replacement: paso 4, imagen 2 de 2
    • Jiggle both joy stick control mini-motherboards out of their holding place.

    • Set aside the mini-motherboards so you can access the main motherboard.

  5. Afterglow Wireless PS3 Controller Button Replacement: paso 5, imagen 1 de 2 Afterglow Wireless PS3 Controller Button Replacement: paso 5, imagen 2 de 2
    • Pull both vibration motors straight up from their holding place.

  6. Afterglow Wireless PS3 Controller Button Replacement: paso 6, imagen 1 de 2 Afterglow Wireless PS3 Controller Button Replacement: paso 6, imagen 2 de 2
    • Unscrew the two 9mm Phillips #0 screws holding the motherboard to the controller front plate.

  7. Afterglow Wireless PS3 Controller Button Replacement: paso 7, imagen 1 de 2 Afterglow Wireless PS3 Controller Button Replacement: paso 7, imagen 2 de 2
    • Detach the main motherboard fom the front pate by carefully pulling it off.

    • Be careful of the trigger buttons when pulling out the motherboard. The buttons have mini-motherboards secured in place on the front plate. Carefully pull these out.

  8. Afterglow Wireless PS3 Controller Button Replacement: paso 8, imagen 1 de 3 Afterglow Wireless PS3 Controller Button Replacement: paso 8, imagen 2 de 3 Afterglow Wireless PS3 Controller Button Replacement: paso 8, imagen 3 de 3
    • Pick up the controller front plate and carefully turn it over so that the buttons left in it will fall out.

    • You may want to flip it while holding it over a container so the buttons do not go bouncing away from your work space.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Aj Coello

Miembro Desde 02/17/17

840 Reputación

6 Guías creadas

Equipo

USF Tampa, Team S19-G5, Hoffman Spring 2017 Miembro de USF Tampa, Team S19-G5, Hoffman Spring 2017

USFT-HOFFMAN-S17S19G5

4 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 13

Ultimos 30 días: 89

Todo El Tiempo: 1,131