Saltar al contenido principal

Adjust Goose-neck (adjustable quill stem) on Specialized Expedition

Qué necesitas

  1. Adjust Goose-neck (adjustable quill stem) on Specialized Expedition, Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: paso 1, imagen 1 de 2 Adjust Goose-neck (adjustable quill stem) on Specialized Expedition, Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: paso 1, imagen 2 de 2
    • Remove the bolt cover with a flathead screwdriver.

  2. Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: paso 2, imagen 1 de 3 Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: paso 2, imagen 2 de 3 Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: paso 2, imagen 3 de 3
    • Loosen the goose-neck (adjustable quill stem) with a 6 mm Allen wrench.

    • After loosening the goose-neck (adjustable quill stem), it still may be stiff. Hold the wheel from turning and twist the handlebars from side to side.

    • If quill stem is still stuck then place 6 mm Allen wrench firmly into bolt and tap with a mallet.

    • Position the handlebars to your preferred height. Make sure not to pull cable and housing to tight. I could adversely effect shifting and braking performance.

    • Make sure you don't raise quill stem above minimum insert line.

  3. Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: paso 3, imagen 1 de 3 Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: paso 3, imagen 2 de 3 Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: paso 3, imagen 3 de 3
    • Align the direction of the goose-neck (adjustable quill stem) with the front tire.

    • Firmly tighten the goose-neck (adjustable quill stem) bolt using a 6 mm Allen wrench.

    • Pop the bolt cover back on.

    • If calling a bicycle repair shop, refer to it as a adjustable quill stem (technical term) instead of goose-neck as mechanic may not know what you are talking about.

Linea de Meta

Una persona más ha completado esta guía.

aaron thielk

Miembro Desde 10/10/10

1,882 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 5-13, Maness Fall 2010 Miembro de Cal Poly, Team 5-13, Maness Fall 2010

CPSU-MANESS-F10S5G13

4 Miembros

17 Guías creadas

Un comentario

Anyone know where/how to buy a replacement bolt cover?

Bennett Hart - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 11

Todo El Tiempo: 9,211