Saltar al contenido principal

Acer Nitro 5 AN515-53-52FA CMOS Replacement

Qué necesitas

  1. Acer Nitro 5 AN515-53-52FA CMOS Replacement, Battery: paso 1, imagen 1 de 1
    • Before starting the replacement, make sure the laptop is turned off and unplugged.

    • Flip the laptop upside down so that the bottom is facing up.

  2. Acer Nitro 5 AN515-53-52FA CMOS Replacement: paso 2, imagen 1 de 2 Acer Nitro 5 AN515-53-52FA CMOS Replacement: paso 2, imagen 2 de 2
    • Use the Phillips #0 screwdriver to unscrew the sixteen 9 mm screws holding the back cover in place.

  3. Acer Nitro 5 AN515-53-52FA CMOS Replacement: paso 3, imagen 1 de 2 Acer Nitro 5 AN515-53-52FA CMOS Replacement: paso 3, imagen 2 de 2
    • Use the opening pick to work your way around the edges to remove the bottom case carefully.

    • Do not try to put too much force on the shell off as you may damage it.

  4. Acer Nitro 5 AN515-53-52FA CMOS Replacement: paso 4, imagen 1 de 1
    • Use the Phillips #0 screwdriver to unscrew the four 9 mm screws holding the battery in place.

  5. Acer Nitro 5 AN515-53-52FA CMOS Replacement: paso 5, imagen 1 de 2 Acer Nitro 5 AN515-53-52FA CMOS Replacement: paso 5, imagen 2 de 2
    • Disconnect the battery's motherboard connector with your fingers.

  6. Acer Nitro 5 AN515-53-52FA CMOS Replacement: paso 6, imagen 1 de 2 Acer Nitro 5 AN515-53-52FA CMOS Replacement: paso 6, imagen 2 de 2
    • Lift the battery up and out of the laptop.

  7. Acer Nitro 5 AN515-53-52FA CMOS Replacement, CMOS: paso 7, imagen 1 de 2 Acer Nitro 5 AN515-53-52FA CMOS Replacement, CMOS: paso 7, imagen 2 de 2
    • Locate the CMOS that is under the battery.

  8. Acer Nitro 5 AN515-53-52FA CMOS Replacement: paso 8, imagen 1 de 2 Acer Nitro 5 AN515-53-52FA CMOS Replacement: paso 8, imagen 2 de 2
    • Gently unplug the port.

  9. Acer Nitro 5 AN515-53-52FA CMOS Replacement: paso 9, imagen 1 de 2 Acer Nitro 5 AN515-53-52FA CMOS Replacement: paso 9, imagen 2 de 2
    • Carefully pull the CMOS Battery, as there is adhesive keeping it attached.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Alfredo Prieto

Miembro Desde 09/01/22

827 Reputación

5 Guías creadas

Equipo

Gateway, Team 1-3, Pee Fall 2022 Miembro de Gateway, Team 1-3, Pee Fall 2022

GCC-PEE-F22S1G3

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 11

Ultimos 7 días: 92

Ultimos 30 días: 339

Todo El Tiempo: 4,666