Acer Nitro 5 AN515-44-R70B Fan Replacement

Introducción

This guide will walk you through the steps of replacing a malfunctioning or non-functional fan in an Acer Nitro 5 AN515-44-R70B. If your laptop is generating excessive heat or noise, especially during resource-intensive activities like gaming, it could be a sign of a fan-related issue.

Qué necesitas

Paso 1 Fan

Acer Nitro 5 AN515-44-R70B Fan Replacement, Fan: paso 1, imagen 1 de 1

Make sure the laptop is off and unplugged before beginning the fan replacement
Flip the laptop upside down so that the bottom is facing up.

Editar

Paso 2

Use the Phillips #0 screwdriver to remove the eleven M2.5x6.0 size screws holding the back cover in place.

Editar

Paso 3

Carefully remove the back shell from the device.
Do not be too forceful as you could damage the shell.

Editar

Paso 4

For extra caution slide out the battery cable from its connector using your fingers.

Editar

Paso 5

Using your fingers, slide out the two fan cables from their connectors.

Editar

Paso 6

Remove the gaffer tape next to the fan.

Editar

Paso 7

Use the Phillips #0 screwdriver to remove the four M2.5x6.0 size screws holding the fan assembly in place.
You can now remove the old fans and replace them with new ones.

Editar