Repara tus cosas Comunidad Tienda

Acer Iconia Tab A501 Wireless Adapter Replacement

Introducción

The wireless adapter is needed to connect to the Wi-Fi network or mobile network. This guide will demonstrate the wireless adapter replacement for the Acer Iconia Tab A501.

Qué necesitas

  1. Acer Iconia Tab A501 Wireless Adapter Replacement, Back Cover: paso 1, imagen 1 de 3 Acer Iconia Tab A501 Wireless Adapter Replacement, Back Cover: paso 1, imagen 2 de 3 Acer Iconia Tab A501 Wireless Adapter Replacement, Back Cover: paso 1, imagen 3 de 3

    • Turn off your device before opening it.

    • Use a plastic opening tool to carefully separate the back cover, starting at the volume buttons.

    • Continue separating the back cover along the short side closest to the camera and around the device.

    Editar

  2. Acer Iconia Tab A501 Wireless Adapter Replacement: paso 2, imagen 1 de 1

    • When separated enough, a little more than halfway around the device, the back cover will be easy to take off.

    Editar

  3. Acer Iconia Tab A501 Wireless Adapter Replacement, Wireless Adapter: paso 3, imagen 1 de 3 Acer Iconia Tab A501 Wireless Adapter Replacement, Wireless Adapter: paso 3, imagen 2 de 3 Acer Iconia Tab A501 Wireless Adapter Replacement, Wireless Adapter: paso 3, imagen 3 de 3

    • In the next step, be careful not to squeeze too hard or scratch the motherboard.

    • Use the angled tweezers to disconnect the motherboard-battery cable from the white connector in the middle of the side opposite the docking port.

    Editar

  5. Acer Iconia Tab A501 Wireless Adapter Replacement: paso 4, imagen 1 de 1

    • Remove all tape covering the wireless adapter.

    Editar

  6. Acer Iconia Tab A501 Wireless Adapter Replacement: paso 5, imagen 1 de 3 Acer Iconia Tab A501 Wireless Adapter Replacement: paso 5, imagen 2 de 3 Acer Iconia Tab A501 Wireless Adapter Replacement: paso 5, imagen 3 de 3

    • Use the flat end of the standard Spudger to disconnect the two small rotatable connectors attached to the wireless adapter.

    Editar

  7. Acer Iconia Tab A501 Wireless Adapter Replacement: paso 6, imagen 1 de 2 Acer Iconia Tab A501 Wireless Adapter Replacement: paso 6, imagen 2 de 2

    • Use a Phillips #1 screwdriver to remove the two 3.0 mm Philips head screws holding the adapter down.

    Editar

  8. Acer Iconia Tab A501 Wireless Adapter Replacement: paso 7, imagen 1 de 2 Acer Iconia Tab A501 Wireless Adapter Replacement: paso 7, imagen 2 de 2

    • Carefully slide the adapter out to remove it.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 327