Repara tus cosas Comunidad Tienda

Acer Iconia B1-720 Battery Replacement

Qué necesitas

  1. Acer Iconia B1-720 Battery Replacement, Rear Case: paso 1, imagen 1 de 3 Acer Iconia B1-720 Battery Replacement, Rear Case: paso 1, imagen 2 de 3 Acer Iconia B1-720 Battery Replacement, Rear Case: paso 1, imagen 3 de 3

    • Insert a plastic opening tool into a gap near the charging port at the top of the device. Slide the tool in either direction along the device.

    Editar

  2. Acer Iconia B1-720 Battery Replacement: paso 2, imagen 1 de 3 Acer Iconia B1-720 Battery Replacement: paso 2, imagen 2 de 3 Acer Iconia B1-720 Battery Replacement: paso 2, imagen 3 de 3

    • Slide the tool along until you have completely separated the rear cover.

    • If needed, place the first tool in the gap created to hold this gap open and use a second tool to pry the remaining portion of the rear cover off.

    Editar

  4. Acer Iconia B1-720 Battery Replacement: paso 3, imagen 1 de 2 Acer Iconia B1-720 Battery Replacement: paso 3, imagen 2 de 2

    • Once all the sides have been separated, you should be able to simply lift the cover off of the device.

    Editar

  5. Acer Iconia B1-720 Battery Replacement, Battery: paso 4, imagen 1 de 2 Acer Iconia B1-720 Battery Replacement, Battery: paso 4, imagen 2 de 2

    • Peel back the plastic tape covering the battery connector.

    Editar

  6. Acer Iconia B1-720 Battery Replacement: paso 5, imagen 1 de 1

    • Use the plastic opening tool to lift the battery off of the back panel. The adhesive used is strong so apply force during removal.

    Editar

  7. Acer Iconia B1-720 Battery Replacement: paso 6, imagen 1 de 3 Acer Iconia B1-720 Battery Replacement: paso 6, imagen 2 de 3 Acer Iconia B1-720 Battery Replacement: paso 6, imagen 3 de 3

    • Lift the battery off of the panel gently. This will disconnect the battery connector from the motherboard.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Kervis Boston

Miembro Desde 03/18/15

479 Reputación

3 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

Michigan Tech, Team 1-1, Lauer Spring 2015 Miembro de Michigan Tech, Team 1-1, Lauer Spring 2015

MTU-LAUER-S15S1G1

2 Miembros

5 Guías creadas

2 comentarios

Why the battery has a 4 pin connector? I tried to buy another generic battery but it got only 2 cables, don't know how to replace :(

Tadeu - Contestar

I just wanted to throw a red flag out there…I broke my connector off the motherboard trying to reinstall the four-pin connection…can anyone advise?

John Merritt - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 2,878