Saltar al contenido principal

Acer Iconia A100 Battery Replacement

Qué necesitas

  1. Acer Iconia A100 Battery Replacement, Battery: paso 1, imagen 1 de 1
    • Start at any side of the tablet.

    • Begin to take apart the tablet with a plastic opening tool along the sides of the tablet.

    • Work your way around the tablet.

    • There are four side pieces in total.

  2. Acer Iconia A100 Battery Replacement: paso 2, imagen 1 de 1
    • Remove the five 4 mm screws from the edges of the tablet with a Phillips #00 screwdriver.

  3. Acer Iconia A100 Battery Replacement: paso 3, imagen 1 de 1
    • Carefully separate the back piece from the device using a plastic opening tool.

    • Remember to open along the entire perimeter of the tablet.

  4. Acer Iconia A100 Battery Replacement: paso 4, imagen 1 de 1
    • Turn the tablet over so that the battery is facing upwards.

    • Remove the four 4mm screws located around the battery.

  5. Acer Iconia A100 Battery Replacement: paso 5, imagen 1 de 2 Acer Iconia A100 Battery Replacement: paso 5, imagen 2 de 2
    • Use the tip of a plastic spudger or opening tool to gently push the connector head out of its socket.

    • Use your fingers or the flat edge of a plastic opening tool to lift the battery up and off of the device.

    • Be sure to not have any water around the device while removing the battery.

    • Be sure to be cautious while removing the battery and remove carefully; avoid ripping the wires attached to the battery.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Omar Acosta

Miembro Desde 03/03/15

526 Reputación

3 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 3

Ultimos 30 días: 11

Todo El Tiempo: 1,834