Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
The Ferrari 4000 ships with a PATA hard drive, which you will have the full knowledge to replace time and time again once you're done.
-
It's so easy, even a caveman can do it.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Let's get started by removing these two Phillips #0 screws holding down the hard drive bay cover on the bottom of the computer near the 3 USB ports.
-
Lift the bay cover to expose the drive cover
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
The only thing separating you from the hard drive glory is a drive cover that looks oddly like a sports car grille...
-
Remove the 4 Phillips #0 screws.
-
Pull the tab to free the grille from the drive.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull back with a spudger (or your fingernails) where the drive plugs in to the computer.
-
Put your fingers where the red circles are and swing the drive up. Once it's up an adequate amount, grab it by its sides and pull it out of the computer.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
You're done with the removal! Follow these instructions in reverse to install the new drive.
-
Cancelar: No complete esta guía.
5 personas más completaron esta guía.