Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the plastic opening tool into the slit on the outer edge of the laptop's screen to remove the plastic piece that borders the screen. Work the plastic opening tool all the way around the screen until the plastic cover has been removed.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate and remove the four 4.2mm screws holding the screen in place by using a Phillips #1 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Tweezers$4.99-
Pull away the screen from the plastic backing. Lay the screen face down onto the keyboard.
-
Use tweezers to peel of the sticker securing the cable to the laptop behind the screen.
-
Unplug the cable to separate the screen.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.