Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the device over and remove the 4.3 mm screw using a Phillips #1 screwdriver.
-
Remove the back cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the Phillips #1 screwdriver, remove the screw from the Wi-Fi card.
-
Carefully remove the piece of tape to allow for more room to remove the Wi-Fi card.
-
Use the blue plastic opening tool to lift and remove the Wi-Fi card from its socket.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the blue plastic opening tool and carefully remove the connectors from the Wi-Fi card.
-