Saltar al contenido principal

Introducción

In this guide the back cover, and RAM card will be removed so that a new RAM card can be inserted.

Partes

No se especificaron partes.

  1. Use a J0 JIS screwdriver to remove 17 7mm screws from the back case. They can be located on the underside of the device. Use a J0 JIS screwdriver to remove 17 7mm screws from the back case. They can be located on the underside of the device.
    • Use a J0 JIS screwdriver to remove 17 7mm screws from the back case. They can be located on the underside of the device.

  2. Remove the plastic tab on the left edge of the device.
    • Remove the plastic tab on the left edge of the device.

  3. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  4. Lift up the back case to remove it. Lift up the back case to remove it.
    • Lift up the back case to remove it.

  5. Locate the RAM slot and push outwards on the metal tabs to release the RAM card. Locate the RAM slot and push outwards on the metal tabs to release the RAM card.
    • Locate the RAM slot and push outwards on the metal tabs to release the RAM card.

  6. Carefully slide the RAM card out of its slot, and insert the replacement card
    • Carefully slide the RAM card out of its slot, and insert the replacement card

Conclusión

To reassemble your device, follow these instructions in reverse order.

Noah lishman

Miembro Desde 20/09/17

101 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 104