Saltar al contenido principal

Introducción

If your laptop doesn't play sound, use this guide to remove and replace your speakers. For this guide, you will need a PH00 screwdriver head and tweezers.

Partes

No se especificaron partes.

  1. Place laptop upside down.
    • Place laptop upside down.

  2. Remove the twelve 5mm screws with a Phillips #1 screwdriver. Remove the twelve 5mm screws with a Phillips #1 screwdriver.
    • Remove the twelve 5mm screws with a Phillips #1 screwdriver.

  3. Lift cover upwards away from you.
    • Lift cover upwards away from you.

  4. Baterías para ordenadores portátiles

    Un pequeño arreglo para un gran resultado.

    Comprar Ahora

    Baterías para ordenadores portátiles

    Un pequeño arreglo para un gran resultado.

    Comprar Ahora
  5. Remove the two Phillips #0 screws from the left speaker. Remove the speaker. Remove the speaker.
    • Remove the two Phillips #0 screws from the left speaker.

    • Remove the speaker.

  6. Remove the two Phillips #0 screws from the right speaker.
    • Remove the two Phillips #0 screws from the right speaker.

    • Do not lift the speaker.

  7. Remove the black tape above the right speaker. Remove the right speaker. Remove the right speaker.
    • Remove the black tape above the right speaker.

    • Remove the right speaker.

  8. Remove the white connector above the black tape. Remove the white connector above the black tape. Remove the white connector above the black tape.
    • Remove the white connector above the black tape.

  9. The speakers are fully disconnected.
    • The speakers are fully disconnected.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 73