Introducción

If your laptop doesn't play sound, use this guide to remove and replace your speakers. For this guide, you will need a PH00 screwdriver head and tweezers.

Partes

No se requieren partes.

  1. Place laptop upside down.
    • Place laptop upside down.

  2. Remove the twelve 5mm screws with a Phillips #1 screwdriver.
    • Remove the twelve 5mm screws with a Phillips #1 screwdriver.

    • Lift cover upwards away from you.

    • Remove the two Phillips #0 screws from the left speaker.

    • Remove the speaker.

    • Remove the two Phillips #0 screws from the right speaker.

    • Do not lift the speaker.

    • Remove the black tape above the right speaker.

    • Remove the right speaker.

    • Remove the white connector above the black tape.

    • The speakers are fully disconnected.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 1

Últimos 30 Días: 23

Todo El Tiempo: 62