Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the twelve 5mm screws with a Phillips #1 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the four Phillips #0 screws that are connected to the left and right speakers.
-
Carefully disconnect the wires that connect the speaker to the rest of the computer.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove two Phillips #0 screws that are beside the ends of the gray wire.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the gray wire slowly with tweezers.
-
Carefully peel wire off.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Slowly remove the two wires that are to the left of the battery with tweezers in an upward pulling motion.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the five Phillips #0 screws that are on the border of the laptop.
-
Disconnect the white wire that is below the fan.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip all of the circuits upwards.
-
Remove all Phillips #0 screws.
-
Remove the keyboard.
-