No se requieren partes.

  1. Place laptop upside down.
    • Place laptop upside down.

  2. Remove the twelve 5mm screws with a Phillips #1 screwdriver.
    • Remove the twelve 5mm screws with a Phillips #1 screwdriver.

    • Lift cover upwards away from you.

    • Remove the four Phillips #0 screws that are connected to the left and right speakers.

    • Carefully disconnect the wires that connect the speaker to the rest of the computer.

    • Remove two Phillips #0 screws that are beside the ends of the gray wire.

    • Remove the gray wire slowly with tweezers.

    • Carefully peel wire off.

    • Slowly remove the two wires that are to the left of the battery with tweezers in an upward pulling motion.

    • Completely remove the battery out of its position.

    • Remove the five Phillips #0 screws that are on the border of the laptop.

    • Disconnect the white wire that is below the fan.

    • Flip all of the circuits upwards.

    • Remove all Phillips #0 screws.

    • Remove the keyboard.


To reassemble your device, follow these instructions in reverse order.

Brian Jimenez

Miembro Desde 18/09/18

145 Reputación

1 Guía escrita

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 1

Últimos 30 Días: 32

Todo El Tiempo: 49