Saltar al contenido principal

Introducción

If your Acer Aspire S3-391-6046 ultrabook is overheating, it might be a problem with the fan assembly. This is a guide for how to remove and replace it.

  1. Place laptop upside down.
    • Place laptop upside down.

  2. Remove the twelve 5mm screws with a Phillips #1 screwdriver. Remove the twelve 5mm screws with a Phillips #1 screwdriver.
    • Remove the twelve 5mm screws with a Phillips #1 screwdriver.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Lift cover upwards away from you.
    • Lift cover upwards away from you.

  5. Unscrew the three screws with a Phillips #0 screwdriver.
    • Unscrew the three screws with a Phillips #0 screwdriver.

  6. Use either your hands or the tweezers to gently peel back the tape.
    • Use either your hands or the tweezers to gently peel back the tape.

  7. Do not pull anything by the wires. Use the tweezers to gently pull the small black plug out.
    • Do not pull anything by the wires.

    • Use the tweezers to gently pull the small black plug out.

    • After the plug is out, you should be able to pull the fan assembly out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Connor Talbot

Miembro Desde 20/09/18

99 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 1

Últimos 30 Días: 8

Todo El Tiempo: 61