Introducción

The Hard Drive is internal, and requires some disassembly to replace. Make sure you have a way to keep all of the screws you'll be taking out sorted, and be careful with the internal parts of the computer -- they can be fragile!

  1. Turn off the laptop and disconnect the power adapter before attempting this guide. Failure to do so can result in a shock hazard.
    • Turn off the laptop and disconnect the power adapter before attempting this guide. Failure to do so can result in a shock hazard.

  2. Remove the top and middle grips that conceal 3 additional screws. Remove the 5 6mm T9 screws. Remove the 8 10mm T9 screws.
    • Remove the top and middle grips that conceal 3 additional screws.

    • Remove the 5 6mm T9 screws.

    • Remove the 8 10mm T9 screws.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Remove the back cover.
    • Remove the back cover.

  5. Unscrew the four 4mm PH0 screws holding the hard drive in place. Unscrew the four 4mm PH0 screws holding the hard drive in place. Unscrew the four 4mm PH0 screws holding the hard drive in place.
    • Unscrew the four 4mm PH0 screws holding the hard drive in place.

  6. Tilt the hard drive up and pull it away and out of its base.
    • Tilt the hard drive up and pull it away and out of its base.

    • Do not use too much force on the hard drive or tilt it so much that the base is broken.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 74