Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

  1. Shut down the laptop and disconnect the power cord
    • Shut down the laptop and disconnect the power cord

    • Failing to disconnect or shut down the laptop could result in damage to the laptop or a shock hazard.

    • Turn the laptop over

  2. Remove the (6) visible 10mm T-7 screws Remove the (4) visible 6mm T-7 screws Use the blue plastic opening tool to carefully remove the rubber pad which covers the two remaining screws
    • Remove the (6) visible 10mm T-7 screws

    • Remove the (4) visible 6mm T-7 screws

    • Use the blue plastic opening tool to carefully remove the rubber pad which covers the two remaining screws

    • Remove the remaining (2) 10mm T-7 screws

  3. Carefully lift the cover upwards
    • Carefully lift the cover upwards

    • If the cover seems stuck use a spudger tool to pry the sides

  4. El kit de herramientas esencial

    Las herramientas más útiles en nuestro kit más compacto.

    Compra ahora

    El kit de herramientas esencial

    Las herramientas más útiles en nuestro kit más compacto.

    Compra ahora
  5. Locate the clip attaching the right-side speakers to the motherboard. Carefully pull on the clip until it detaches from the motherboard.
    • Locate the clip attaching the right-side speakers to the motherboard.

    • Carefully pull on the clip until it detaches from the motherboard.

    • Use a plastic opening tool if needed.

  6. Remove the two 3.5mm #00 Phillips screws which hold the speaker in place. Carefully lift the right-side speaker assembly away from the motherboard.
    • Remove the two 3.5mm #00 Phillips screws which hold the speaker in place.

    • Carefully lift the right-side speaker assembly away from the motherboard.

  7. Locate the clip attaching the left-side speakers to the motherboard. Carefully pull on the clip until it detaches from the motherboard.
    • Locate the clip attaching the left-side speakers to the motherboard.

    • Carefully pull on the clip until it detaches from the motherboard.

    • Use a plastic opening tool if needed.

  8. Remove the two 3.5mm #00 Phillips screws which hold the speaker in place. Carefully lift the left-side speaker assembly away from the motherboard.
    • Remove the two 3.5mm #00 Phillips screws which hold the speaker in place.

    • Carefully lift the left-side speaker assembly away from the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Andrew Rodiek

Miembro Desde 13/01/15

598 Reputación

4 Guías creadas

Equipo

USF Tampa, Team 3-4, Hickman Winter 2015 Miembro de USF Tampa, Team 3-4, Hickman Winter 2015

USFT-HICKMAN-W15S3G4

4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 485