Saltar al contenido principal

Partes

No se especificaron partes.

  1. Be sure computer is unplugged, turned off, and battery is removed.
    • Be sure computer is unplugged, turned off, and battery is removed.

    • Then, locate memory door and remove screw with #0 Phillips screw driver.

  2. If needed, pry open door using knife or flat screw driver.
    • If needed, pry open door using knife or flat screw driver.

  3. Remove plastic door to expose lone memory DIMM. Press two metal clasps on both sides of the DIMM apart to allow memory module to pop up. Press two metal clasps on both sides of the DIMM apart to allow memory module to pop up.
    • Remove plastic door to expose lone memory DIMM.

    • Press two metal clasps on both sides of the DIMM apart to allow memory module to pop up.

  4. Head over to Newegg and buy yourself a 2gb DDR2, 667mhz laptop memory to install in your Aspire One.
    • Head over to Newegg and buy yourself a 2gb DDR2, 667mhz laptop memory to install in your Aspire One.

Conclusión

To reassemble your device, follow these instructions in reverse order.

11 personas más completaron esta guía.

Dante Bertana

Miembro Desde 08/05/10

672 Reputación

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 9

Todo El Tiempo: 20,716